Numerical model simulations of channel flow for the South Saskatchewan River, Canada
Datasets consists of the results of Computational Fluid Dynamics (CFD) flow simulations for a section of the South Saskatchewan River, Canada. The aim of these CFD simulations was to investigate the effect of dunes on the depth-averaged and near-bed flow fields. Modelling was carried out using the open source CFD package OpenFOAM to solve the three-dimensional Navier-Stokes equations. The dataset consists of two files, one with simulation results for a river bed characterised by alluvial bedforms (dunes) and one for a smooth river bed without dunes. This work was part of NERC project NE/L00738X/1. Digital Surface Models (DSMs) were constructed using imagery obtained on four occasions (13th May 2015; 2nd Sept 2016; 8th June 2017; and 12th June 2017). Full details about this dataset can be found at https://doi.org/10.5285/7db04405-2f5e-4543-aa94-948ddbcd588a
dataset
https://data-package.ceh.ac.uk/sd/7db04405-2f5e-4543-aa94-948ddbcd588a.zip
name: Supporting information
description: Supporting information available to assist in re-use of this dataset
function: information
https://data-package.ceh.ac.uk/data/7db04405-2f5e-4543-aa94-948ddbcd588a
name: Download the data
description: Download a copy of this data
function: download
https://catalogue.ceh.ac.uk/id/7db04405-2f5e-4543-aa94-948ddbcd588a
doi:
eng
inlandWaters
environment
Environmental Monitoring Facilities
publication
2008-06-01
-108.105
-103.831
56.029
53.43
2015-05-13
2017-06-17
publication
2019-12-12
The aim of these CFD simulations was to investigate the effect of dunes on the depth-averaged and near-bed flow fields. To accomplish this, simulations were conducted using two meshes: one using high resolution measured channel morphology that included dunes, and one with the dune-scale morphology removed from the model domain. A digital elevation model (DEM) for the model domain was constructed from specially commissioned aerial imagery (pixel resolution 0.06 m) captured at a height of ~1500 m from a fixed-wing airplane with an UltraCamXp sensor. A 0.06 m resolution DEM was constructed using a combination of large format Structure-from-Motion (SfM) photogrammetry (using the commercial software Pix4D) and a regression model between water-depth and image brightness (see Strick et al., 2019). SfM techniques were applied to generate a DEM in emergent areas and in a narrow section along one channel bank where the river bed is composed predominantly of gravel. A depth-brightness model was applied in all other areas to calculate water depth from pixel brightness in the aerial imagery. The DEMs generated using SfM and the depth-brightness model were merged to produce a single DEM for use in CFD mesh generation. To remove dunes from the original 0.06 m resolution DEM constructed from aerial photography without affecting the representation of bank or bar topography, the outlines of the banks and bar fronts were identified visually in ARCMAP, and raster masks produced to separate each bar surface for individual filtering. River banks and the bar lee slopes of the unit bars were therefore not modified. To remove the dunes from the individual bar tops a moving-average, weighted-mean filter was used, with a window size of 6 m x 1 m, with the longest axis in the downstream direction, parallel to dune length. Two structured, finite volume CFD meshes were then constructed (one including dune morphology and one with dunes removed) for CFD modelling, both comprised of 4948 x 1172 x 20 cells in the downstream, cross-stream and vertical directions respectively. Horizontal mesh resolution was an average of 8 cm with 20 cells in the vertical and a planar water surface (at 0 m depth). Modelling was carried out using the open source CFD package OpenFOAM to solve the three-dimensional Navier-Stokes equations with a Re-Normalization Group (RNG) k-epsilon turbulence closure. The free surface was represented in the model with a rigid-lid approximation. Inlet conditions were defined using measured flow velocities. A Neumann pressure condition was set at the outlet. Second order central differencing numerical schemes were used for gradients, second order bounded central differencing for divergence; and an unbounded second order deferred corrected scheme for the Laplacian surface normal gradients were employed. Convergence criteria were iteratively tested and set to a tolerance of 1x10-8 for pressure and 1x10-10 for velocity, k and epsilon. Solver tolerances were set to 1x10-10 for pressure and 1x10-12 for velocity. The results of two simulations are included here.
publication
2010-12-08
Comma-separated values (CSV)
© Natural Environment Research Council
If you reuse this data, you should cite: Ashworth, P., Nicholas, A. , Parsons, D., Sambrook Smith, G., Unsworth, C. (2019). Numerical model simulations of channel flow for the South Saskatchewan River, Canada. NERC EDS Environmental Information Data Centre https://doi.org/10.5285/7db04405-2f5e-4543-aa94-948ddbcd588a
University of Brighton
author
Exeter University
author
University of Hull
author
University of Birmingham
author
Exeter University
author
Exeter University
pointOfContact
NERC EDS Environmental Information Data Centre
custodian
NERC EDS Environmental Information Data Centre
publisher
Environmental Information Data Centre
Lancaster Environment Centre, Library Avenue, Bailrigg
Lancaster
LA1 4AP
UK
pointOfContact
2022-05-18T12:21:32