Double Torsion Beamtime, Mechanical Data (NERC grant NE/M001458/1)
The mechanical data (loads, displacements) recorded during double torsion experiments on samples of 6 shale materials and a sandstone. These experiments were conducted on the I12 beamline, Diamond Light Source, Harwell as part of beamtimes EE13824-1 and EE13824-2 between 26/02/17 and 03/03/17. The data were collected using the standard double-torsion technique, with a load cell behind the actuator recording applied force. The method and results are described in detail by Chandler et al, (2018,submitted) "Correlative optical and X-ray imaging of strain evolution during Double Torsion Fracture Toughness measurements in shale" The data was collected with the aim of correlating local deformation around a progressing fracture (through X-Ray and optical imaging) with recorded mechanical data from the loading system. The data was collected by M. Chandler, A-L Fauchille, J. Mecklenburgh, H. K. Kim and L. Ma, and was processed by M. Chandler and R. Rizzo. The complete dataset is present.
nonGeographicDataset
https://www.bgs.ac.uk/services/ngdc/accessions/index.html#item120272
function: download
http://data.bgs.ac.uk/id/dataHolding/13607389
eng
geoscientificInformation
publication
2008-06-01
Toughness
Shale
Rock mechanics
revision
2011
NERC_DDC
2017-02-26
2017-03-03
creation
2018-10-04
notApplicable
Double torsion samples were fabricated from 6 different shales and one sandstone. Samples were fabricated in 3 different directions relative to the sedimentary layering. Average sample dimensions were 20 mm x 60 mm x 3 mm. In total 66 double-torsion experiments were performed over the beam time. A double torsion apparatus was mounted on to the tomographic stage in the I12 beamline. Two high speed video cameras were also mounted at about 20° either side of the X-Ray beam looking at the sample surface. Double-torsion experiments were conducted following the method described by Becker et al (2011). The method and results are described in detail by Chandler et al, (2018,submitted) "Correlative optical and X-ray imaging of strain evolution during Double Torsion Fracture Toughness measurements in shale"
publication
2011
false
See the referenced specification
publication
2010-12-08
false
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
Tab-delimited text files
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Senior Lecturer, School of Earth and Environmental Sciences
University of Manchester
Michael Smith Building, Oxford Road
Manchester
M13 9PL
pointOfContact
British Geological Survey
Environmental Science Centre,Keyworth
NOTTINGHAM
NG12 5GG
United Kingdom
+44 115 936 3100
pointOfContact
2023-01-23