Soil water chemistry data from Climoor fieldsite in Clocaenog Forest
[THIS DATASET HAS BEEN WITHDRAWN]. This dataset includes a range of determinands present in soil water in the experimental plot at the Climoor field site in the Clocaenog Forest, in north-east Wales. Soil water was collected at two depths in the soil profile - approximately 5cm and 20cm. At the bottom of the rooting zone (approximately 5cm depth) zero tension lysimeters were used. At the deeper depth (approximately 20cm depth) ceramic cup suction samplers were used. Data were collected between October 1998 and March 2009 at two weekly intervals. Determinands include: pH, Ammonium nitrogen (NH4-N), Nitrate nitrogen (NO3-N), Sulphate (SO4-S), dissolved organic carbon, dissolved organic nitrogen, Calcium (Ca), Potassium (K), Magnesium (Mg), Sodium (Na), Phosphate phosphorus (PO4-P), Chloride (Cl), total dissolved phophorus and total dissolved nitrogen. Full details about this dataset can be found at https://doi.org/10.5285/1deb9ee0-a01c-4ce6-a5b0-a1ad32beeff7
dataset
1392297399147
CEH:EIDC:
eng
environment
Environmental Monitoring Facilities
publication
2008-06-01
biogeochemistry
water
-3.479
-3.391
53.077
53.033
1998-10-13
2009-03-31
publication
2014-03-07
unknown
Soil solution was sampled below the rooting zone (5 cm depth) by 10 cm x 20 cm polyethylene zero tension lysimeters, installed in each of the plots in autumn 1998. Two lysimeters were installed in each plot and samples were bulked at each sampling interval (bi-weekly) to give a representative sample for the plot. Tensioned soil water samplers (Prenart super quartz, Copenhagen, Denmark) were also installed during autumn 1998, at a depth of approximately 30 cm within the mineral horizon, in each of the plots. Three tensioned soil water samplers were installed per plot, again samples were bulked at each sampling period (biweekly) to give a representative sample for each plot. Samples from both the zero-tension lysimeters and the tensioned soil water samplers were transported to the laboratory within 4 hours of sampling. The samples were filtered through a 45 micrometer cellulose nitrate filter, and stored at 4 degrees C before analysis. pH was measured on a Metrohm 888 Titrando fitted with a 20ml burette and 815 Robotic USB Sample Processor XL (Metrohm, Switzerland). Nitrate (NO3), chloride (Cl), sulphate (SO4) was determined using Dionex DX100 chemically suppressed ion chromatograph using carbonate eluant and AS4a columns (Dionex Corporation, Sunnyvale California 94088-3603 USA). Sub-samples were acidified with 2M HCl and sparged with oxygen to remove any inorganic carbon in the sample before analysis. The remaining non-purgeable organic carbon (assumed to be DOC) was determined with a Shimadzu TOC-V CPH (Shimadzu Corporation, Kyoto, 604-8511, Japan). Ammonium was analysed colormetrically using a SEAL AQ2 discrete analyser. Chemical analysis was carried out in the UKAS accredited labs in CEH Lancaster.
publication
2010-12-08
Comma-separated values (CSV)
© UK Centre for Ecology & Hydrology
If you reuse this data, you should cite: Sowerby, A., Emmett, B.A. (2014). Soil water chemistry data from Climoor fieldsite in Clocaenog Forest. NERC Environmental Information Data Centre https://doi.org/10.5285/1deb9ee0-a01c-4ce6-a5b0-a1ad32beeff7
UK Centre for Ecology & Hydrology
pointOfContact
Centre for Ecology & Hydrology
author
Centre for Ecology & Hydrology
author
NERC EDS Environmental Information Data Centre
custodian
NERC Environmental Information Data Centre
publisher
UK Centre for Ecology & Hydrology
owner
Environmental Information Data Centre
Lancaster Environment Centre, Library Avenue, Bailrigg
Lancaster
LA1 4AP
UK
pointOfContact
2022-05-05T08:53:19