Pore-scale dynamics and the multiphase Darcy law
A pore-scale experimental investigation of microscopic steady-state flow during co-injection from very low to high flow rates in the pore space of a sandstone is applied using 4D synchrotron X-ray micro-tomography to advance our understanding of flow regimes. We report the results of micro-CT imaging experiments directly visualizing the simultaneous flow of both a wetting and a non-wetting fluid through a Bentheimer sandstone, at pore-scale resolution. For small flow rates, both fluids flow through unchanging, distinct, bicontinuous 3D pathways. At higher flow rates, however, the non-wetting fluid continually breaks up into discrete ganglia; these are then advected through the medium. We propose that the non-wetting fluid breaks up when the sum of the viscous forces exerted by the wetting and the non-wetting fluids exceed the capillary forces at the pore scale.
nonGeographicDataset
http://www.bgs.ac.uk/ukccs/accessions/index.html#item126031
function: download
http://dx.doi.org/10.5285/8e8669ee-1496-432a-8c98-5651d7bf4495
name: Digital Object Identifier (DOI)
function: information
http://data.bgs.ac.uk/id/dataHolding/13607426
eng
geoscientificInformation
publication
2008-06-01
NGDC Deposited Data
UKCCS
Fluid flow
Carbon capture and storage
Darcys law
revision
2022
NERC_DDC
2017-12-09
2017-12-12
publication
2019-02-27
notApplicable
1. A dry scan was taken with 2 MPa confining pressure. 2. The brine-saturated sample was scanned. A back pressure of 2,000 kPa was set for the whole system. 3. Oil was injected at 2 mL/min for 30 minutes to reach the initial water saturation. 4. Water and oil were injected when fw were 0.15 and 0.3 by keeping the total volumetric flow rate fixed at 0.02 mL/min for one and half hours respectively. 5. Water and oil were injected at equal flow rate of 0.01 mL/min respectively. At the same time, the pressure drop across the whole sample was recorded. Two more hours were waited after the pressure stabilized. Successive scans were taken from the start without stopping. 6. The total flow rate was increased to 0.04 mL/min, 0.08 mL/min, 0.4 mL/min, 0.8 mL/min and 1.2 mL/min step by step when fractional flow was kept at 0.5. For each flow rate, two more hours were waited until steady state.
publication
2011
false
See the referenced specification
publication
2010-12-08
false
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
Raw
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Qatar Carbonates and Carbon Storage Research Centre
pointOfContact
Imperial College London
London
United Kingdom
author
Imperial College London
London
United Kingdom
author
Imperial College London
London
United Kingdom
author
Imperial College London
London
United Kingdom
pointOfContact
British Geological Survey
The Lyell Centre, Research Avenue South
EDINBURGH
EH14 4AP
United Kingdom
+44 131 667 1000
pointOfContact
2024-04-18