Identification

Title

UKCCSRC Call 2 project report: Advanced Sorbent via Controlled Sintering of Natural Ca-sorbent for Carbon Capture

Abstract

In this study, two strategies, thermal pretreatment and chemical doping, were investigated as a method of improving the residual carrying capacity of Longcliffe and Havelock limestone for calcium looping systems. Four parameters were varied during thermal pretreatment: temperature (900-1100 degrees C), time (3-12 hr), gas composition (0-100 % CO2 balanced in N2) and particle size (90-355 micrometre). After pre-calcination, the sorbents were subjected to 20 carbonation-calcination cycles performed in a thermographic analyser (TGA) to monitor any signs of sorbent improvement. The degradation of sorbent activity was modelled using the decay equation suggested by Grasa and Abanades (2006). Both Longcliffe and Havelock samples showed self-reactivation when pretreated under CO2, however this did not result in a greater carrying capacity after 20 carbonation/calcination cycles compared to the untreated limestone. For chemical doping, Longcliffe doped using 0.167 mol % HBr via quantitative wet impregnation method resulted in an increase in residual carrying capacity of 27.4 % after thermal pre-treatment under CO2 when compared to the untreated but doped limestone, assuming self-reactivation continued as modelled. When Longcliffe was doped and then pretreated under pure N2, the limestone showed self-reactivation, which was not seen in the undoped sorbent when also pretreated under N2. Thus, the success of pretreatment may be dependent on the chemical composition of the limestone. Finally, BET surface area and BJH pore volume analysis was used to understand the changes in the sorbents' morphologies. The closure of the mesopores (dpore<150 nm) after the pretreatment was correlated to the self-reactivation in the subsequent cycles.

Resource type

nonGeographicDataset

Resource locator

http://www.bgs.ac.uk/ukccs/accessions/index.html#item44424

function: download

Unique resource identifier

code

http://data.bgs.ac.uk/id/dataHolding/13606874

codeSpace

Dataset language

eng

Spatial reference system

code identifying the spatial reference system

Classification of spatial data and services

Topic category

geoscientificInformation

Keywords

Keyword set

keyword value

originating controlled vocabulary

title

GEMET - INSPIRE themes

reference date

date type

publication

effective date

2008-06-01

Keyword set

keyword value

Carbon capture and storage

originating controlled vocabulary

title

BGS Thesaurus of Geosciences

reference date

date type

revision

effective date

2011

Keyword set

keyword value

NERC_DDC

Geographic location

West bounding longitude

East bounding longitude

North bounding latitude

South bounding latitude

Temporal reference

Temporal extent

Begin position

2015-03

End position

2016-02

Dataset reference date

date type

creation

effective date

2015-03

Frequency of update

notApplicable

Quality and validity

Lineage

UKCCSRC Call 2 project, grant number: UKCCSRC-C2-206, Lead institution: University College London

Conformity

Conformity report

specification

title

INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology

reference date

date type

publication

effective date

2011

degree

false

explanation

See the referenced specification

Conformity report

specification

title

Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

reference date

date type

publication

effective date

2010-12-08

degree

false

explanation

See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF

Data format

name of format

pdf

version of format

Constraints related to access and use

Constraint set

Limitations on public access

Constraint set

Limitations on public access

The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.

Responsible organisations

Responsible party

organisation name

Imperial College London

email address

not available

responsible party role

pointOfContact

Responsible party

organisation name

Imperial College London

email address

not available

responsible party role

principalInvestigator

Responsible party

organisation name

Imperial College London

email address

not available

responsible party role

pointOfContact

Metadata on metadata

Metadata point of contact

organisation name

British Geological Survey

full postal address

The Lyell Centre, Research Avenue South

EDINBURGH

EH14 4AP

United Kingdom

telephone number

+44 131 667 1000

email address

enquiries@bgs.ac.uk

responsible party role

pointOfContact

Metadata date

2023-05-24

Metadata language

eng