Filter by
Remove filters
67
results found
- Published by:
- Oxford City Council
- Last updated:
- 29 March 2017
Turbidity from EA's WIMS data archive in the upper Thames catchment.
- Published by:
- Environmental Information Data Centre
- Last updated:
- 19 November 2025
This dataset contains pH, turbidity and viral concentration information in untreated and treated wastewater samples at wastewater discharge points and wastewater treatment plants along the Conwy...
- Published by:
- Environmental Information Data Centre
- Last updated:
- 19 November 2025
This dataset contains high-resolution (5-minute) discharge, turbidity, suspended sediment concentration, and total phosphorus concentration data measured at three stream sites in the Littlestock...
- Published by:
- British Geological Survey (BGS)
- Last updated:
- 14 January 2026
Deposition in many Ocean Margin settings involves settling of non-cohesive grains ('sand') through a non-Newtonian suspension of colloidal ('mud') particles. Although sand or mud-only settling is...
- Published by:
- British Geological Survey (BGS)
- Last updated:
- 14 January 2026
Deposition in many Ocean Margin settings involves settling of non-cohesive grains ('sand') through a non-Newtonian suspension of colloidal ('mud') particles. Although sand or mud-only settling is...
- Published by:
- British Geological Survey (BGS)
- Last updated:
- 14 January 2026
This dataset contains three dimensional synchrotron x-ray tomographic (SRXTM) datasets and analyses of nuclei and nucleoli in embryo-like fossils from the Ediacaran Weng'an Biota. The data...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 10 July 2024
This data set consists of biogeochemical sensor data from seabed moorings.
Temperature, salinity, dissolved oxygen, chlorophyll fluorescence, turbidity
where fitted to a Cefas ESM2 data logger....
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 14 September 2024
This data set consists of biogeochemical sensor data from seabed moorings.
Temperature, salinity, dissolved oxygen, chlorophyll fluorescence, turbidity
where fitted to a Cefas ESM2 data logger....
- Published by:
- Joint Nature Conservation Committee
- Last updated:
- 17 May 2018
The survey was undertaken to describe rocky shore biotopes along the gradient of decreasing salinity in a highly turbid macrotidal estuary. Standard MNCR methods were used.
- Published by:
- Joint Nature Conservation Committee
- Last updated:
- 17 May 2018
The survey was undertaken to describe rocky shore biotopes along the gradient of decreasing salinity in a highly turbid macrotidal estuary. Standard MNCR methods were used.
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 10 July 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 10 July 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 10 July 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 14 September 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 14 September 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 14 September 2024
This data set consists of biogeochemical sensor data from seabed moorings. The
mooring consists of a 3 legged stainless steel "minilander" 1.5 meters high.
The biogeochemical sensors are mounted...
- Published by:
- Environmental Information Data Centre
- Last updated:
- 19 November 2025
This data set comprises of hourly water quality monitoring and flow data of a site within the River Loddon catchment, UK, from September 2017 to September 2018. Parameters measured were...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 10 July 2024
This data set consists of biogeochemical sensor data from SmartBuoy moorings
(Mills et al, 2005). SmartBuoys consist of a 4 meter tall stainless steel
frame with a fibreglass torroid for...
- Published by:
- Marine Environmental Data & Information Network
- Last updated:
- 14 September 2024
This data set consists of biogeochemical sensor data from SmartBuoy moorings
(Mills et al, 2005). SmartBuoys consist of a 4 meter tall stainless steel
frame with a fibreglass torroid for...
- Published by:
- Environment Agency
- Last updated:
- 01 August 2025
Real time water quality data is collected using equipment provided by the National Water Quality Instrumentation Service and is deployed by area teams within the Environment Agency.
The link...